How does an RFID lock work?

- Sep 29, 2019-

How does an RFID lock work?

First, support almost Mifare Classic/ Desfire solution in the area of 13.65MHZ, compatible with already existing Mifare system.

Second, three levels system for user administration induction main admin level, admin level, user level.

Third, there is up to 100 users per lock.

Fourth, low voltage alarm and there are two colors for lock status( red and green).

Fifth, the system has both a temporary mode and a fixed mode, and users can switch freely  by themselves.

Sixth, IP54, 16*19 standard mounting hole so it is easy to install & open.


The following points should be noted when selecting locks:

1. Compared with the weight of the lock, the heavier the lock core is, the thicker the material is and the more wear-resistant it is. On the contrary, the material is thin and easy to be damaged.

2. Watch the surface smoothness of the lock, whether it is delicate and smooth, without spots.

3. Buy locks with high brand reputation as far as possible to support quality and durability.

4. Open repeatedly to verify the sensitivity of the core spring.

Installation of locks should wait for the paint to be thoroughly air-dried, otherwise, the volatiles of the paint and the coating on the surface of the locks will produce chemical reaction, which will lead to fading and mottling and affect the visual effect.

Xiamen Make Security Technology Co.,Ltd.

ADD:No.29 Houshantou Roud, Shenqing Industrial Area, Guankou Town, Jimei District, Xiamen 361023, China

TEL: +86-592-6363716/17/18/19